User guide

16
4) Finally, you need to tell the system about IP address received from WAN, DHCP
Hostname, and DNS Server then press Next button to finish the wizard.
OPERATION MODE – CLIENT BRIDGE
In the Client Bridge mode your OUTDOOR AP/CPE will behave just the same as
Wireless adapter. With Client Bridges, the WLAN and the LAN are on the same
subnet. Consequently, NAT is no longer used and services that are running on the
original network.
2) Press Site Survey button and look for available wireless network then click on the
SSID that you attempt to connect to it; Alfa_B is the SSID that we are going to
connect in this example. Press Next button when finished.