User guide

13
◆Server IP — Sets the L2TP server IP Address. (Default: l2tp_server)
◆User Name — Sets the L2TP user name for the WAN port.
◆Password — Sets a L2TP password for the WAN port.
◆Address Mode — Sets a L2TP network mode. (Default: Dynamic IP)
◆Operation Mode — Enables and configures the keep alive time.
◆Primary DNS Server — The IP address of the Primary Domain Name Server. A DNS
maps numerical IP addresses to domain names and can be used to identify network
hosts by familiar names instead of the IP addresses. To specify a DNS server, type
the IP addresses in the text field provided. Otherwise, leave the text field blank.
◆Secondary DNS Server — The IP address of the Secondary Domain Name Server.
3)
Network Name (SSID) — SSID (Service Set Identification) must be assigned to all
wireless devices in your network. Considering your wireless network security.
Security Mode — Select the security method and then configure the required
parameters. (Options: Disabled, WEP-AUTO, WPA-PSK, WPA2-PSK, WPA-Auto-PSK,
WPA, WPA2, WPA-Auto, 802.1X; Default: Disabled)
OPERATION MODE – AP BRIDGE
1) In this mode bridge your OUTDOOR AP/CPE to another Access Point.