Owner's manual

036NH QIG

Insert the supplied CD into your

computer’s disk drive. The setup program

should start automatically after a few

seconds. If instruction does not appear,

locate and double-click the setup.exe file

on the CD.

When the 1

title screen appears, click

“AWUS036NH” then on the following

screen select the operating system your

computer is operating on.

Read the license agreement and choose “I

accept the terms of the license

agreement” and click Next

Choose “Install driver and Ralink WLAN

Utility” and click “Next”

PAGE 1
036NH QIG Insert the supplied CD into your computer’s disk drive. The setup program should start automatically after a few seconds. If instruction does not appear, locate and double-click the setup.exe file on the CD. When the 1st title screen appears, click “AWUS036NH” then on the following screen select the operating system your computer is operating on.
PAGE 2
Choose “Ralink Configuration Tool” and click “Next” Click “Install” to continue. Click “Finish” and the Utility will pop up for Windows XP. (Choose “No, I will restart my computer later” and click “Finish” for Windows Vista) Attach the antenna to the wireless adapter and plug in the USB cable to AWUS036NH. Insert the USB connector into an available USB port, your computer will then detect and activate the adapter automatically.
PAGE 3
Select your target network and click “Connect” Insert the network security key and click “OK” You will see symbol in front of the name of the network, it means you have successfully connected to your wireless network.