Submittal Sheet

Technical Data
Standard materials
Cover plates Stainless steel
Connections Stainless steel
Plates
Stainless steel
Brazing filler
Copper
Dimensions and weight
1
A measure (mm) 13 + (2.31 * n)
A measure (inches) 0.51 + (0.09 * n)
Weight (kg)
2
1.2 + (0.11 * n)
Weight (lb)
2
2.65 + (0.24 * n)
1. n = number of plates
2. Excluding connections
Standard data
Volume per channel, litres (gal) 0.054 (0.014)
Max. particle size, mm (inch) 1 (0.039)
Max. flowrate
1
m
3
/h (gpm) 14 (62)
Flow direction Parallel
Min. number of plates 4
Max. number of plates 150
1. Water at 5 m/s (16.4 ft/s) (connection velocity)
Dimensional drawing
Measurements in mm (inches)
S3
S3
S2
S2
S4
S4
S1
S1
113 (4.45)
50 (1.97) A
250 (9.84)
313 (12.32)
Design pressure and temperature
CB30 PED approval pressure/temperature graph
CB30 UL approval pressure/temperature graph
CBP30 PED approval pressure/temperature graph
Designed for full vacuum.
Alfa Laval plate heat exchangers are available with a wide
range of pressure vessel approvals. Please contact your Alfa
Laval representative for more information.
NOTE: Values above are to be used as an indication. For exact
values, please use the drawing generated by the Alfa Laval
configurator or contact your local Alfa Laval representative.
Marine Approvals
CBM30 can be delivered with marine classification certificate
(ABS,BV,CCS,ClassNK,DNV,GL,LR,RINA,RMRS)
.
CHE00025EN 2016-09
Alfa Laval reserves the right to change specifications without prior notification.
How to contact Alfa Laval
Contact details for all countries are continually updated on our
website. Please visit www.alfalaval.com to access the information
direct.
Alfa Laval is a trademark registered and owned by Alfa Laval Corporate AB.