Install Instructions

Installation
Installation
Unpacking
Carefully open the package containing the plate heat
exchanger. Check that all items are included according to the
specifications and that all parts are undamaged.
Before installing the plate h
eat exchanger, remove the plastic
plugs or caps in the connections.
Lifting
Warning!
Never lift only by the connections or any b of the studs.
Use straps when lifting and place them according to
the figu re below.
Figure 2. Examples of lifting.
Note!
When using lifting lugs, keep the angle of the straps
as close as possible to 90° but never less than 60°.
Warning!
Be c areful and keep clear of the heat ex changer
during lifting to avoid personal injuries.
Document ID Language Edition
12
Instruction M anual -
Brazed plate heat exchangers
3450021401 EN 2017-06