user manual

15
3.1 REPLACEMENT OF
THE PILOT NOZZLE.
Unscrew the xing screw
(h) of the pilot light tube.
3.2
Remove the tube (i) from
the seat.
3.3
Remove the pilot nozzle (j)
from the cone-like support
(o) and replace it with the
spare component supplied
in the kit. Reassemble
everything following the
same steps in reverse
order.
h
i
o
Following the conversion, apply the new label
on the product and check that the size of the nozzle
corresponds to that shown on the label.
j