User Manual

GLOBAL CONFIGURATION
To enter the global setup menu, rst hold down the MODE knob, then press the left
footswitch.
Turn the MODE knob to select the parameter you want to change, then turn the MIX / DATA
knob to set its value.
Hold the MODE button to save your settings and exit the menu.
M.JACK EXPRESSN MultiJack is expression pedal input
FOOT. SW MultiJack is foot switch input
MIDI MultiJack is MIDI input (requires MIDI to TRS adapter)
CHANNL Sets MIDI input channel
RPHASE NORMAL R / DRY output phase normal
INVERT R / DRY output phase inverted
STEREO MONO+DRY INPUT jack is mono, R / DRY jack outputs dry signal
SUM+DRY INPUT jack sums to mono, R/DRY outputs dry signal
STEREO INPUT jack is stereo, L and R output stereo
PRESET Sets number of presets available on device. Does not aect MIDI.
DISPLY STATIC Display does not show bars or moving values
MOVING Display shows animated value bars
CC OUT OFF Pedal does not send MIDI CC values
JACK Pedal sends MIDI CC from MultiJack
USB Pedal sends MIDI CC from USB MIDI
BOTH Pedal sends MIDI CC from both
BRIGHT Sets display brightness
EXP LO Sets the heel down calibration for the MultiJack expression pedal
EXP HI Sets the toe down calibration for the MultiJack expression pedal
SPLASH Choose startup animation, set to “none” to bypass the animation.
RESET Turn to reset CONFIG, PRESETS, or ALL. Hold MODE to reset.
Set to MIDI DUMP to export the pedal presets over USB MIDI.
Conguration items named “ITEMxx” are not used, reserved for future expansion.
CHANNL
BYPASS
STEREO
1 / 4 CFG v1.01a
EXPRESSN
001
NORMAL
MONO+DRY
M.JACK
MIX
(DATA)
MODE
PRESS PAGE
HOLD MENU