User Manual

PRESETS
How do you make quick changes on a pedal that has 9+ knobs? PRESETS. The
Syntax Error
2
allows you to save up to 32 presets that contain the entire state of the
pedal.
Loading a preset recalls all knob positions, sequence steps, sequencer settings, and
expression pedal mappings.
To load a preset, hold the BYPASS / PRESET footswitch. You can set the number of
available presets in the Setup Menu, from 1 to 8. You can also set the pedal to access
the upper banks of presets (9-16, 17-24, 25-32) in the same menu. This allows you to
use multiple banks of presets for different gigs, bands, instruments, whatever you like.
You can also use an external MIDI controller to load any preset from 1-32, regardless of
how the Setup Menu is congured.
To save a preset, rst use the pedal knobs to tweak the sound, then hold the MODE
knob. Press and hold the BYPASS / PRESET footswitch to enter the save menu.
If you want to save to the current preset, you can just hold down the BYPASS /
PRESET footswitch again. If you prefer to rename the preset, turn the MODE knob to
select a character in the name and then tap the MODE knob to edit that character. Use
the MODE knob to select the preset number and edit to change the save location.
CANCEL
SAVE TO
1 RUBRTAPE
EDIT PRESET NAME
MIX
(DATA)
MODE
PRESS PAGE
HOLD MENU
1 RUBRTAPE
TURN TO SELECT
CHARACTER OR
PRESET
TAP TO SELECT
CHARACTER OR
NUMBER TO EDIT