User Manual

STEREO MODES
INPUT TIP
INPUT RING
MIX OUTPUT
DRY OUTPUT
INPUT BUFFER OUTPUT BUFFER
LEFT MIXER
INPUT BUFFER OUTPUT BUFFER
DSP PROCESSING
STEREO MODE: MONO
Mono Mode processes the input signal in mono, and outputs a mono signal on the L / MONO
output jack. The dry signal is available on the R / DRY output jack.
INPUT TIP
INPUT RING
MIX OUTPUT
DRY OUTPUT
INPUT BUFFER OUTPUT BUFFER
LEFT MIXER
INPUT BUFFER OUTPUT BUFFER
DSP PROCESSINGINPUT MIXER
STEREO MODE: SUM
INPUT TIP
INPUT RING
LEFT OUTPUT
RIGHT OUTPUT
INPUT BUFFER OUTPUT BUFFER
LEFT MIXER
INPUT BUFFER OUTPUT BUFFER
RIGHT MIXER
DSP PROCESSINGINPUT MIXER
STEREO MODE: STEREO
Sum mode combines left and right inputs into a mono signal for processing and outputs a
mono signal on the L / MONO output. Useful if you need to sum a stereo source when using
a single amplier.
Stereo Mode preserves the separate stereo dry signals. Eect processing is based on the sum
of the left and right inputs, and is split to both outputs in most modes. Some modes process
the stereo image separately.
The phase of the R / DRY output may be set to normal or inverted using the conguration
menu. The conguration with the better bass response is usually correct.
The Venture Series features advanced stereo routing cabilities, selectable in the Global
conguration menu. Choose one of the following stereo modes to suit your rig or your gig.