User Manual

6 7
SETUP MENU
To enter the Setup menu, rst hold down the PAGE / MENU knob (lower right,) then hold the
left foot switch.
Turn the lower left knob to scroll through the available parameters, then turn the lower right
knob to set its value.
Hold the PAGE / MENU knob (lower right) to save your settings and exit the menu.
TURN TO
SCROLL
LIST
TURN TO
CHANGE
ITEM
HOLD TO
SAVE
PRESETS
How do you make quick changes on a pedal that has 12+ knobs? PRESETS. Every
Leap Series pedal allows you to save up to 32 presets that contain the entire state of the
pedal.
Loading a preset recalls all knob positions, sound modes, and expression pedal
mappings.
To load a preset, hold the BYPASS / PRESET foot switch. You can set the number of
available presets in the Setup Menu, from 1 to 8. You can also set the pedal to access
the upper banks of presets (9-16, 17-24, 25-32) in the same menu. This allows you to use
multiple banks of presets for dierent gigs, bands, instruments, whatever you like.
Hold both footswitches to scroll back to the previous preset.
If eight presets per bank isn’t enough, you can enable a double-bank of 16 presets by setting
PRESET = 1-16 or 17-32.
You can also use an external MIDI controller to load any preset from 1-32, regardless of how
the Setup Menu is congured.
To save a preset, rst use the pedal knobs to tweak the sound, then hold the Page knob.
Press and hold the BYPASS / PRESET foot switch to enter the save menu.
If you want to save to the current preset, you can just hold down the BYPASS /
PRESET foot switch again. If you prefer to rename the preset, turn the lower left knob
to select a character in the name and turn the Page knob to edit that character. You can
also change the save location by highlighting the preset number then turning the Page knob.
Press and hold the BYPASS / PRESET foot switch to save, or hold the TAP / CTRL foot switch to
cancel the save.
TURN TO
CHOOSE
LETTER
TURN TO
CHANGE
LETTER
HOLD LEFT FOOT
SWITCH TO CANCEL
HOLD RIGHT FOOT
SWITCH TO SAVE
M.JACK EXPRESSN MultiJack is expression pedal input
FOOT. SW MultiJack is foot switch input
MIDI MultiJack is MIDI input (requires MIDI to TRS adapter)
PRST.EX Preset selection using ALEXPANDER footswitch
SCRL.EX Preset scroll using ALEXPANDER footswitch
CHANNL Sets MIDI input channel
STEREO MONO IN INPUT jack is mono
INP. SUM INPUT jack sums to mono
STEREO INPUT jack is stereo
RPHASE Sets phase of R output, allows correction for amp or eect phase.
PRESET Sets number of presets available on device. Does not aect MIDI.
DISPLY PRESET Display shows preset except when turning knobs
KNOBS Display shows knobs except when loading preset
BLANK Display is o when not adjusting knobs
BRIGHT Sets display brightness
RETURN Pedal will retun to the main control page after 5, 10, 30 seconds
MIDOUT OFF Pedal does not send MIDI CC values
JACK Pedal sends MIDI CC from MultiJack
USB Pedal sends MIDI CC from USB MIDI
BOTH Pedal sends MIDI CC from both
TRAILS OFF - hard bypass, ON - trails bypass, AUTO - trails fade out
EXP LO / HI Sets heel and toe calibration for expression pedal
TEMPO PRESET Presets load with saved tempo
GLOBAL Presets load with the current tap tempo
PWR ON Choose BYPASS or ENGAGE to set the power-on state of pedal
TIME.D BAR Time displays as bar graph
BPM Time displays in beats per minute
MS Time displays in milliseconds
RESET Turn to reset CONFIG, PRESETS, or ALL. Hold PAGE knob to reset.
Select MIDIDUMP to export presets over USB MIDI
BYPASS | PRESET
TAP | CTRL