User Manual

Table Of Contents

SPECIFICATIONS

• Input: Mono or stereo (TRS)

• Output: Mono or stereo (use either TRS or dual TS)

• Input Impedance: 1M ohms

• Output Impedance: 560 ohms

• Power Requirements: DC 9V only, 250mA or greater

• Requires isolated DC power supply

• Dimensions: 2.4” x 4.7” x 1.6” W x H x D not including knobs (67 x 120 x 42mm)

• 32 user presets, selectable on-device without additional controllers

• MultiJack enables expression pedal, foot switch, expander switch, or MIDI input

• Full MIDI control over every knob and setting

• EXP Morph allows controlling all knobs from expression or MIDI

• Automated ramping function for expression without external pedal

• CTL foot switch for tap tempo or ramp trigger

• USB port for rmware updates and USB MIDI

• Buered bypass (hybrid analog+digital)

CHANGE LOG

v1.01b 2/22/23

Fix issue with MIDI clock not setting ECHOVERB delay time properly

v1.01a

Ramp always resets after program load, ramp also clears if trigger mode is changed

removed incorrect knob settings in cong mode (knobs 12+13)

v1.01

DSP - now use global MREG / CREG / SFR to save space in ash

DSP - improve input muting for Echoverb mode

Enable support for ALExpander multi switch

added dual bank (1-16 or 17-32)

GREAT TONES. DOING GOOD.