Owner`s manual

6-Channel Stereo Analog Line Mixer with Two Independent Zone Outputs
- 6 -
Specifications
Inputs:
Line: 10K input impedance
140mV rms sensitivity (for 1V output)
Front Mic: 10K input impedance unbalanced
1.5mV rms sensitivity (for 1V output)
60mV rms max input
Mic 1/Mic 2: 10K input impedance
2.5mV rms sensitivity (for 1V output)
80mV rms max input
Outputs:
Line: 9V rms max
Headphone: 0.5 watt into 47 ohms
Distortion: less than 0.01%
Signal-to-Noise Ratio (vs. maximum output):
Line: better than 92dB
Front Mic: better than 90dB
Mic 1/Mic 2: better than 80dB
Phono: better than 80dB
Frequency response:
Line: 20Hz - 22KHz +/-0.5dB
Mic: 20Hz - 18KHz +/-0.5dB
Phono: +/-1dB except for controlled attenuation of
-3dB @ 20Hz to reduce rumble and feedback
Equalization Boost/Cut Amount (Front Mic / Zone A / Zone B):
Bass: +/-13dB
Middle: +/-14dB
Treble: +/-12dB
Power consumption:
10.2 watts typical
12.8 watts with full output
Dimensions/Weight:
19" (W) x 1.75" (H) x 7.87" (D) / 5 lbs
480mm (W) x 44mm (H) x 200mm (D) / 2.2 kgs