Specifications

Recording
Studio 32 Reference Manual
57
To bounce multiple tracks to two tracks (stereo):
1 For each Channel (tape track) you wish to bounce, press the FADER SOURCE
button so it is down.
This sends the tape tracks to the Channel (long) FADERS.
2 Assign the Channels to Groups 1 and 2 by pressing the 1/2 buttons next to the
channel faders.
3 Raise the Group 1 and Group 2 MASTER FADERS to the maximum position.
4 Place tracks 5 and 6 into record-ready, and select either GRP 1/2 or MON 1/2 as
the Control Room source. If you’re using MON 1/2, turn the monitor pan (the
upper black knob, not the one next to the MUTE key) for track 5 hard left, and
the monitor pan for track 6 hard right.
5 Adjust each Channel’s PAN knob and FADER to achieve a desirable mix.
6 Rewind the tape, and record onto tracks 5 and 6 those portions you wish to
bounce.
7 Tracks 1-4 are now available for recording new parts.