Specifications

Recording
Studio 32 Reference Manual
54
defined., Connecting to a Headphone Amp). In this case, the MONITOR 1/2
MASTER control will set the overall level going to the headphones.
Turn down the input controls (if provided) of the headphone amplifier itself so
that average levels from the monitor section (up to +10 on the meter) do not make
the headphones too loud.
Option: You may use a standard “stereo splitter” cable with the TRS 3-conductor
end plugged into the Headphone output jack and connect it to an amplifier, with
the headphone level set to about 12 o’clock.