Specifications

SECTION 1
SECTION 1
DATADISK QUICK START
TO FORMAT A DISK
DATADISK will use any standard 3 1/2" double sided, double density
floppy diskette, but first the disk must be customized for use in
DATADISK . This is called "Formatting".
1) Insert Disk
2) Press the FORMAT button. The display will read:
"FORMAT DISK?".
3) Press the DO/YES button. The display will read: "ARE
YOU SURE?"
4) Press the DO/YES button again to initiate formatting.
DATADISK will proceed to format the disk and will tell
you what its doing.
5) When formatting is complete, the display will return to
"FORMAT DISK?" once again. You can now begin a
Receive operation by pressing the RECEIVE button.
RECEIVING ONE MIDI DATA FILE FOR STORAGE
1) Press the RECEIVE button. The display will read "RECV
ONE SYSEX: WAITING FOR DATA".
2) Send the MIDI exclusive file from the sequencer, syn-
thesizer, or sampler. The display will tell you that it's re-
ceiving the data.
3) When the transmission is complete, the DATADISK will
display that the file has been stored and assign a file
number.
RECEIVING MULTIPLE MIDI DATA FILES FOR STORAGE
1) Press the RECEIVE button twice. The display will read
"RECV MULT SYSEX: WAITING FOR DATA".