Specifications

SECTION 6
48
The same sequence can be played back again by pressing the
DO/YES button, or another sequence or sysex file can be selected
by pressing the SCROLL buttons.
If, while playing back a sequence, you decide that you wish to
abort the operation, press either of the SCROLL buttons. The
display will briefly read:
OPERATION
ABORTED
The display will then return to the Send File MIDI Sequence page.
If a MIDI Sequence is aborted while being sent or if a MIDI Stop
command is received while the file is being sent, the DataDisk will
automatically send the following:
1) MIDI Stop Command
2) Controller #64 "sustain pedal" OFF (all 16 channels)
3) Note-offs for all playing notes (all 16 channels)
NOTE: The DataDisk will not merge MIDI data being sent with data being
received when the MIDI Echo function is enabled.
MONITORING DATA BEING SENT FROM THE DATADISK TO ANOTHER
SEQUENCER
Out
Out
IN
IN
Midi Echo
On
Note that the MMT-8's
countdown should be set to 00
and its MIDI Echo set to ON.
SYNCING DATADISK TO A SEQUENCER
It is possible to have the DataDisk play along in sync with an
external sequencer or drum machine.
1) Press the MIDI button three times. The display will read: