Specifications

SECTION 4
26
TARGET UNIT NOT
RESPONDING
This display occurs when the Data Disk sends a file to an instru-
ment that requires handshaking and receives no handshaking re-
sponse.
TARGET UNIT NOT
RESPONDING
PLEASE NOTE: There are safeguards to prevent against tricking
the DATADISK by swapping disks before initiating an operation. For
example:
1) With disk A in the drive, press the SEND button.
2) Eject disk A: insert disk B.
3) When you press DO/YES to initiate an operation,
DATADISK will realize that the disk in the drive is different
from the original and will just load the new disk's
directory and re-enter the Send function.
CAUTION: If the user tries to trick DATADISK in Receive mode,
DATADISK will not be able to load or read back the data. You're
safe as long as you don't swap disks while in Receive mode without
pressing the Receive button after inserting a new disk!