Specifications

DATADISK FUNCTIONS
17
RECEIVE MIDI DATA FUNCTION
The RECEIVE MIDI Data Function is used to store MIDI system ex-
clusive data received from a synthesizer, sequencer, or effects
processor to a floppy disk inside the DATADISK. There are two
pages to this function which are:
RECV ONE
SYSEX
Receive One Sysex (the display will read "RECV ONE SYSEX:") is
used to receive a single system exclusive file over MIDI. One sy-
sex (system exclusive) file may be a single program or a complete
dump from a synthesizer, sampler, or sequencer.
RECV MULT
SYSEX
In this mode, system exclusive data from multiple products is re-
ceived by DATADISK and stored as a single file. This makes it fast
and easy to locate the file and load the data back into the multiple
synthesizers or devices at a later time. The display will read
"RECV MULT SYSEX".
SEND MIDI DATA FUNCTIONS
The SEND MIDI Data Function is used to send MIDI system exclu-
sive files to a synthesizer, sequencer, or effects processor. There
are two pages to this function which are:
SEND FILE XXXXXX
YYYYYY ZZZZZZZZ
This page is used to send a single system exclusive file over MIDI,
where XXXXXX is the manufacturers name of the file stored on
disk, YYYYYY is the product model name, and ZZZZZZZZ is the
name of the file to send. Files are selected by pressing the
SCROLL UP or SCROLL DOWN buttons until the desired file is dis-
played. The files are viewed alphabetically.
SEND ALL
FILES
In this page, all files stored on the disk will be sent over MIDI to
their respective instruments. This way, an entire setup of a number
of instruments, sequencers, samplers, and processors can quickly
be sent from just this one page.