Service manual
Alesis MMT-8 Service Manual 1.00 12
00000000 not used
After touch change format:
01111011 After touch flag (123)
1vvvvvvv After touch amount 0-127
0000cccc MIDI channel number 0-15
00000000 not used
00000000 not used
Pitch bend format:
01111100 Pitch bend flag (124)
10000000 not used
0000cccc MIDI channel number 0-15
0aaaaaaa Pitch bend lsb
0bbbbbbb Pitch bend msb
Sysex format:
01111101 Sysex flag (125)
1vvvvvvv sysex byte 0-127
bccccccc b=1=EOX, b=0 then c=sysex byte
00000000 not used
deeeeeee d=1=EOX, d=0 then e=sysex byte
A sysex message ends (and an EOX is sent) whenever bits b or d are high, or a new 7 byte packet occurs, or
a packet other than sysex occurs. The sysex message can be as long as necessary by having consecutive 5
byte sysex packets.
End of track format:
80H, # clocks lsb, # clocks msb, 0, 80H, 0, 0
The number of clocks should equal the number of beats in the sequence multiplied by 96.