User guide

www.aleratec.com

Introduction

Front Panel

1 Disc Tray

This tray is for loading the disc. It will accept 120 mm and 80 mm discs.

Please place the disc in the exact center of the tray.

2 Emergency Eject Pinhole

In the event of loss of power or failure to open the tray by pressing the

Eject button, insert the straightened end of a large paper clip or similar rigid

object into the Emergency Eject hole to open the tray.

3 Drive LEDs

This indicator lights up when data is being accessed or when data is being

recorded on a disc.

4 Eject Button

This button is used to open or close the tray.

Note: Part Numbers 260155 and 260156 – DVD/CD-ROM Drive (Top) and DVD/

CD-Recorder (Bottom).

Note: Part Number 260157 – top drive in is a second DVD/CD Recorder.