User guide

www.aleratec.com
48
Using the DVD/CD Duplicator
Main Menu
Advanced Setup - continued
12.14 USB Option
This function lets you connect the Duplicator to a computer. Be sure that your
computer supports USB 2.0.
Note: When the USB option is off, “14. USB Mode” will be hidden; that is, it won’t
appear in the first layer of the function menu. Only “12. Adv Setup” will appear.
When the USB option is on, the original “12. Adv Setup” will change to “12.14
Adv Setup”.
There are two ways to enter USB Mode: Auto and Manual.
Auto:1. The Duplicator has auto link. It will enter “USB L. H Mode” simply
by connecting the USB cable to the USB port of the Duplicator and the
USB port of your computer. The display will appear as shown at the left.
When you are nished with USB Mode, simply disconnect the USB cable
from the computer, and the Duplicator will switch to Stand Alone.
12-14. Adv Setup
USB Option


ESCENT
USB L. H Mode
D1: Mult D2: Mult


ESCENT