User guide

www.aleratec.com
45
Using the DVD/CD Duplicator
Main Menu
Advanced Setup - continued
12.07 Update Firmware
This function is to update your rmware.
Make sure there are no discs in the system. Place the disc that contains the 1.
latest rmware data into the DVD/CD-ROM. During updating, do not turn
off the power to the machine, since the updating will not be nished until
the machine resets itself.
Press 2. ENT to update. Display will ask if you want to update. Select YES,
then press the ENT button. Do not turn the power off until the update
nishes and the machine resets to COPY.
Procedure to make the Firmware disc:
Get the latest rmware download from the Aleratec website at a.
www.aleratec.com.
Note: Be careful to download the correct firmware; if incorrect firmware
is used the duplicator will not function
Unzip the rmware and write the le “cdxxx.bin” to a blank DVD/b.
CD-R or DVD/CD-RW disc. The Session of the disc has to be closed.
Searching F/W---
XXX/XXXXX


ESCENT
12-07. Adv Setup
Update Firmware


ESCENT