User guide

www.aleratec.com

Making Disc-to-Disc Copies

This process copies a Master Disc to several blank discs simultaneously. Due to

the nature of simultaneous disc duplication, a good quality Master Disc and lower

recording speeds maybe necessary to ensure high success and quality duplications

rates.

1. Turn on the duplicator. After the duplicator has booted up, you will see the

following display:

2. Make sure the Source Drive is set to the DVD-ROM drive.

It is very important to make sure that your current Source Drive is the DVD-ROM

in order to avoid unnecessary error messages. To check the Source Drive, do the

following:

a. Use UP or DOWN arrow buttons to navigate to the following screen:

b. Press ENT to enter Select Source menu and you will see the following:

Make sure it is located at “Drive 2 Port 2.1”. If not, press the UP or

DOWN navigation button to search for it.

c. Press ENT to submit your selection.

3. Go back to the “COPY” menu.

a. Use UP or DOWN arrow button to navigate to the following screen:

DUPLICATOR 1.00

1. COPY

COPY TEST PRINT SOURCE

ESC

ENT



DUPLICATOR 1.00

9. Select Source

COPY TEST PRINT SOURCE

ESC

ENT



Drive 2 Port 2.1

DVD-ROM

COPY TEST PRINT SOURCE

ESC

ENT



DUPLICATOR 1.00

1. COPY

COPY TEST PRINT SOURCE

ESC

ENT

