Brukerveiledning

ManualsBrandsAlena ManualsDraperiesystemAlena draperisystem

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Alena Drapery System System Speciﬁcation

085319f 1 07.19.21

Alena | Drapery System

The Alena Drapery System is an easily installed,

low-cost window treatment solution designed for the

hospitality and multi-dwelling market. Guests have

several options for convenient control via Lutron

remote controls and keypads, or by pulling the

drapery panel in the direction they want it to move. If

a user is unaware of the control device, they will learn

of the drapery’s motorization when they manually pull

on the panel. The drive will take over and move the

panel automatically to its Open or Close limit.

Features

• Pull-to-Start function* allows for motorized operation

with or without controls

• Ultra-quiet drive operation: will not exceed 50 dBA

measured 1 m (3 ft) from the drive

• Simple plug-and-play installation with no

programming required

• Drapery can be stopped while moving with the touch

of any button on a keypad

• All drives start, move, and stop smoothly and quietly

• Can be installed in new construction or retroﬁt

application

• Pinch Pleat and Ripplefold options

• Decouples the EDU and track into two separate

components, allowing the EDU to be replaced or

upgraded in the ﬁeld

• Low-voltage, DC power

• 8 year limited warranty

* For reliable Pull-to-Start performance, grasp the

draw edge of the drape no more than 5 ft (152 cm)

from the top, and pull in the direction of desired travel

Alena Pinch Pleat Drapery System

for illustrative purposes only; not a system speciﬁcation drawing

Alena Ripplefold Drapery System

for illustrative purposes only; not a system speciﬁcation drawing

Summary of content (13 pages)

PAGE 1
Alena Drapery System System Specification 085319f 1 07.19.21 Alena | Drapery System The Alena Drapery System is an easily installed, low-cost window treatment solution designed for the hospitality and multi-dwelling market. Guests have several options for convenient control via Lutron remote controls and keypads, or by pulling the drapery panel in the direction they want it to move.
PAGE 2
Alena Drapery System System Specification 085319f 2 07.19.21 Specifications Power • PELV / NEC Class 2, 24-36 V- power supply required. • Control system power supply offers (spike and brownout) over voltage protection (+/- 10% of line voltage) for all devices in the system. • Power must be derived from a compatible Lutron 35 V power supply (WIN-PS-1-35V), sold separately.
PAGE 3
Alena Drapery System System Specification 085319f 3 07.19.21 System dimensions (pinch pleat carriers shown; ripplefold snap-pendants available) Top view (single track, right draw) 1.6 in (41.3 mm) 1.3 in (31.8 mm) 2.1 in (52.1 mm) Front view (single track, right draw) Track width 216 in (5.48 m) max 10.6 in (270 mm) Electronic Drive Unit 1.9 lbs (0.9 kg) 3.3 in (83.8 mm) 3.3 in (83.8 mm) 2.1 in (52.3 mm) 8.89 in (225.
PAGE 4
Alena Drapery System System Specification 085319f 4 07.19.21 Installation Clearances Single drapery track system Maintain enough clearance between the drapery track and the inside face of the top treatment or ceiling recess to allow the fabric to move freely. Dimensions* 11.25 in (286 mm) 3.5 in (89 mm) 2.5 in (64 mm) Plan View (mounting details not shown) Elevation View 1 in (25 mm) Dual drapery track system Two Alena drapery tracks can be used for a combination sheer/blackout treatment.
PAGE 5
Alena Drapery System System Specification 085319f 5 07.19.21 Mounting Options Ceiling Mount Recess Mount Structural Member Recess-Mount Bracket (qty. varies with track length) 1½ inch Wood Screw Ceiling Ceiling Structural Member Washer Washer Recess-Mount Bracket Ceiling Recessed Pocket Drapery Track 1.2 in (31 mm) Cam Lock 1 1/16 in (27 mm) Minimum Pocket Depth Drapery Track 1.3 in (31.8 mm) 2.
PAGE 6
Alena Drapery System System Specification 085319f 6 07.19.21 Fabric Fullness Generally, drapery “fullness” is the aesthetic result of adding more or less fabric to a given system width. Lutron expresses fullness as a multiple (pinch pleat; 2x, 2.5x, 3x) or percentage (ripplefold; 80%, 100%, 120%) of (flat) fabric panel width, relative to system (track) width. • Lower fullness results in smaller stackback size when open and more spread when closed.
PAGE 7
Alena Drapery System System Specification 085319f 7 07.19.21 Hanging Fabric - Pinch Pleat Lutron recommends a drapery hook setting of 1/2 in (13 mm) from the top of the drape to the top of the hook (hooks not included). This locates the drapes just below the track and prevents it from rubbing on the track. It is recommended that a distance of 1/2-1 in (13-25 mm) be maintained between the bottom of drapery panel and the floor.
PAGE 8
Alena Drapery System System Specification 085319f 8 07.19.21 Hanging Fabric - Ripplefold Drapes are typically sized so the bottom of the drapery track and top of the drapery panel are located 4 in (101 mm) above the window casing. Location may need to be adjusted to accommodate the specific drapery panel height and application. It is recommended that a space of 1⁄2-1 in (13-25 mm) be maintained between the bottom of drapery panel and the floor.
PAGE 9
Alena Drapery System System Specification 085319f 9 07.19.21 Ripplefold Snap Tape Specifications The Lutron Ripplefold Drapery System is compatible with standard ripplefold snap tape with spacing of 4.25 in (108 mm) between snaps. • Standard carriers accept male snaps; quantity required varies with track width. • Three (3) female snaps are required at the draw end as shown. – Compatible female snap tap is available from Alan Richard Textiles, Ltd. By the yard: alanrichardtextiles.com/store/DRFT02-Y.
PAGE 10
Alena Drapery System System Specification 085319f 10 07.19.21 Alena Drapery System | Single Drive Wiring 4-pin EDU connector Alena Drapery Drive Terminal block of drive controlling single drape Wire Type A * All switch contacts are momentary and normally open Wire Type B WIN-PS-1-35V Plug-In Power Supply (line cord not included) Notes: • • • Standalone draperies can be controlled with a keypad, or via manual activation.
PAGE 11
Alena Drapery System System Specification 085319f 11 07.19.
PAGE 12
Alena Drapery System System Specification 085319f 12 07.19.
PAGE 13
Alena Drapery System System Specification 085319f 13 07.19.