Replacement Part List
Thank you for purchasing Log Splitter. Please
carefully read this operation manual and
strictly observe these instructions for the
safety
of
you and the personnel around you.
In
this manner, you will enjoy long and
satisfactory use
of
this product.
GENERAL
SAFETY
RULES
Warning:
All the operation
and
use
of
the machine
may
have some risk,
but
with operator caution
this will reduce the risk
of
injury. also, can
result in injury to the operator, remove
damage
of
property.
1.
Read and fully understand the operation
manual, including the operation and scope
of
application as well as potential hazards.
2. Check for any damaged parts before use,
to
ensure the log splitter will operate normally.
3. before
you
start any maintenance
or
attempt
to replace any parts please ensure the
machine is switched
off
and the plug
removed from the socket
4. We advise that you should wear head eye
and ear protection - carry on with your
wording.
5. Never operate this machine under the
influence
of
alcohol
or
medicines.
6.
Never
stand on the
machine,
therwise
there maybe a risk
of
injured.
7.
Never
operate this machine without reading
the instructions.
Never
leave the machine until it stops
completely
8. When calibrating
or
changing the parts
or
working
on
the machine,
you
should pull
the power plug out
of
the outlet.
9. Make sure that the cord is fully
protected
and
ensure no damage from
assembly
or
materiaL
10. Should keep a safe distance between
your hands and the log, and between the
pusher and the wedge
.lfthe
splitter is
turned
on
, never place
your
hands into the
moving parts
of
the machine.
11. Never
wear
jewelry
or
loose clothes,
which can
be
entangled with the log
chips.
ELECTRICAL
CONNECTION
Connect the power cord to a standard power
supply via an approved plug
or
suitable
protective and isolated switch .The power
should meet specifications stated on the
nameplate.
Extension
cable
If
an extension cable is used
we
recommend
the use
of
a moisture-proof connection.
This cable will produce a voltage drop,
which can hamper the electrical motor from
giving a full
power
and reduce the
machine's performance. The extension cable
must comply
to
the following specifications:
0-10
metre-Diameter
of
cable-2.5
square millimeters
Never use extension cable exceeding
lO
metre.
If
in
doubt, please inquire a qualified
electrician. Never make electrical repair by
yoursel£