Replacement Part List

Trouble-shooting
Problems
that may arise when using the log splitter and recommended actions are shown in
the table below.
In the case that operation is carried out by unauthorised operators the
guarantee is null
and void, and the manufacture is not responsible for any injury to the
operator, bystanders, animals or damage.
Problem
Probable cause Corrective action
Log fails to split Incorrect positioning
of the
log
Log exceeds permitted
dimensions
or the wood is
too
hard for the capacity of
the machine.
Wedge do not cut
Oil leak
Hydraulic pressure too low
Position correctly the log
Try to cut a small part or use
other means to reduce the
size
of the log
Sharpen the wedge, check
for
burrs or nicks, file if
necessary
Locate the leak using a piece
of card or wood.
Contact your dealer
Log Pusher/Cam
advances jerkily
or
with strong
upward
vibrations
Air in the circuit
Check oil level. Fill oil
if
necessary.
If problem remain,contact
your dealer.
Oil leak from the Leakage form the
tank Check that the bleed screw
Cams
or from other Seals worn has been unscrewed before
external points
using the machine.
Contact your dealer
9