Use and Care Manual

Page 6 of 13
--With dust hose and the dustproof ring and connected with the extension rod[1-2]
6.2 Electronic Control
This machine has the characteristics as below：
--Lock-on switch [1-3]；
--Adjustable Speed [1-4]
Adjust the speed from 800-1700rpm by turning the speed wheel [1-4]. In this way, user can choose different
speed for different sanding surface.
6.3 Replace Sanding Pad 【1-5】
-- Insert the hex wrench (size 5) into the hexagonal screw bolt on the sanding pad
-- Hold the sanding pad firmly, and then turn the wrench to dismount the pad.
-- Install new sanding pad by tightening the bolt