Instructions / Assembly

3.The Air Compartments

These ALEKO Inflatable Boats have three air

chambers in the tube and an inflatable keel. The air

chambers are completely separate and ensure

buoyancy in the event of a single chamber failure.

4.The one

-way valve

You r ALEKO boat utilizes a one-way valve, a proven design that has been used for 20 years.

This simple, rugged, one-way valve makes inflation easy. The inner valve design allows air

to flow into the hull but not out and the outer valve cap makes the seal permanent. The

plastic stem on the inner valve allows the boat to be defined. Push in the inner valve and

turn it to release air. Make sure the plastic stem is in the out position for inflation.

5.Rear Drain

Valve

All ALEKO Inflatable Boats have a rear drain valve to drain water from the inside of the

hull.

6.Foot Pump

All ALEKO Inflatable Boats come with a deluxe high pressure

foot pump to ensure the boat is inflated to the recommended

air pressure.

Maximum Air Pressure: Tube 3.6PSI(0.25bar);Keel 3.6PSI(0.25bar)