Instructions / Assembly

Installing the Mounting Hardware

Step 5

Sign the bolt-hole point on the gate bracket and gate. Do this by placing a punch or a sign in the middle

of each bolt slot on the post bracket assemblies and the gate bracket. It allows slight adjustments to the

post bracket. Then remove the post bracket and gate bracket by taking off the C-clamps.

Step 9

Cut all parts of bolt which are extending beyond the tightened nuts by saw.

Installing of the Opener

Step 10

Fasten the opener to the previously bolted post bracket assembly with the four clevis pins provided.

Insert one clevis pin through the gate opener and the gate bracket. Insert the other clevis pin through the

gate opener and the post bracket assembly. Secure the clevis pins with the two hairpin clips.

Step 6

Using a drill and a bit of ￠10.5, drill holes through the post

and the gate at the sign bolt hole point.

Step 7

Attach the post bracket assemblies to the gate posts by

inserting four M10 x 200 bolts through each post bracket

assembly and the drilled holes in the gate post. Fasten each

bolt with one ￠ 10 washer, one ￠ 10 lock washer, and

one ￠10 nut.

Step 8

Attach the gate brackets to each gate

by inserting two M10 x 75 bolts

through the gate brackets and the

drilled holes in the gates. Fasten

each bolt with one ￠10 lock washer,

and one ￠10 nut.