Instructions / Assembly

AC2000 SLIDING GATE OPERATOR
3. Technical parameters
Table 1
Power supply AC110, 60Hz
Output torque (Max.)
15N·m
Motor speed 1650rpm
Reduction ratio 1:30
Limit switch Magnetic limit switch
Auto close time 0~44 sec.
Remote control mode Single Button
Environmental temperature -10ºC to +55ºC
Emergency release key in case of power failure
4. Packing list
After receiving the product, you should make an unpack-inspection, in which you should check
whether the product was damaged. If you have any problem please contact dealer.
Table 2 Parts List
Item Quantity
Sliding gate operator 1
Operator Bracket 1
Remote control 2
Master Links 2
Chain 1
Chain Bolts 2
Chain Brackets 2
“U” Bolts for square & round gate frame 4
2 ¾_ (M8x 70mm) Bolts for mounting operator to the bracket and washers 4
2 ½_ (M8x65mm) Bolts for mounting Magnet brackets and washers 4
3 ¾_Anchor bolts, Anchors, Washers and Nuts 4
5/8_ (M8x15mm) Socket Head Cap screws for mounting chain box 4
Manual release key 2
Magnet brackets 2
Magnets 2
1m BVR 0.7mm
2
antenna 1
User’s manual 1
4