Instructions / Assembly

AC2000 SLIDING GATE OPERATOR
15. Output power supply: +12V (DC +12V), COM (CO)，DET (Loop detector), I.R. (Infrared
N.C)
DET
COM
Out
COM
AC24V AC24V
Terminal
X5,No.11
Loop detector
Control board
COM
GND
+12V
Out
COM
DET
COM
+12V
Loop detector
Control board
Loop detector with DC input
Infrared with DC input
Control board
Infrared
Control boardInfrared
Terminal
X5,No.11
AC24VAC24V
COM
Out
COM
I.R
+12V
COM
I.R
COM
Out
+12V
GND
COM
Terminal
X8, No.15
Terminal
X8, No.15
Terminal
X8, No.15
Terminal
X8, No.15
Loop detector with AC input
Infrared with AC input
Schematic diagram
16. Beeper: DC12V
17. Learn button: AN
18. Dip-switch
19. Antenna: ANT
7. Tuning and operation
Remote control
Button 1
Button 2
Button 4
Button 3
Fig.9
z To add extra remote controls (Learning)
: Press the button ‘AN’ (See control board scheme
No.17) on the control board, then the ‘LED2’ will be on and turn off, the beeper will ring
about 1 second, then press the remote control button which you want to use, the beeper
will ring about 2 seconds and the ‘LED2’ will turns on about 2 seconds and then turns off.
The learning process is finished.
Up to 100 remote controls may be used.
11