USER MANUAL DVM-70
. 1 PRODUCT DESCRIPTION 2 OVERVIEW OF FUNCTIONS 2.1 ICONS ON THE SCREEN: During use, the following icons may be displayed on the screen: indicates reception strength: very good reception The Alecto DVM-70 is a wireless audio/video monitoring system suitable for indoor use. A typical use for it would be for monitoring babies and small children. The built-in lullabies, which can be turned on remotely, give you an additional helping hand in getting your child off to sleep.
2.
2.3 CAMERA UNIT: Ba 1 2 3 13 4 12 5 1. 6VDC / 800mA 2. 6 1 2 3 4 5 6 7 8 9 10 11 7 8 9 10 11 temperature sensor light sensor (for night light) Infrared LEDs (for night vision) built-in microphone on/off indicator on/off button volume - button built-in speaker start/stop button for lullabies volume + button ‘next lullaby’ button 3 INSTALLATION 3.
e e s Batteries: 1. 2. 3. Unlock the battery cover of the camera unit by placing a flat, blunt object in the slot on the bottom of the camera unit; the battery cover can now be released from the camera unit. Insert 4 x 1.5 V batteries, size AA (R6), in the battery compartment as indicated. Highquality alkaline batteries should preferably be used.
Positioning tips • When using the unit as a baby monitor: position the camera unit at a minimum distance of 2 metres from your baby and make sure that the power cable is safely tucked away. • The temperature sensor projects out from the back of the camera unit. Make sure that the sensor is hanging freely, is not in direct sunlight and is not heated by light bulbs. • To ensure an optimum range, it is best to position the camera unit as high as possible, away from large metal surfaces.
of he ne Charging: As soon as you connect the monitor unit to the mains adapter and plug the adapter into a 230V wall socket, the battery will be charged. • The lamp lights up. This lamp lights up when and for as long as the battery is being charged, and turns off when the battery is full. • If the monitor unit is turned on and you have images, you will see the battery status in the top right of the screen. This battery symbol is animated while the battery is being charged.
4 USAGE 4.1 • • SWITCHING ON/OFF: Briefly press the button to switch the unit on. Keep this button pressed for 2 to 3 seconds to switch the unit off. 4.2 • CONNECTION INDICATOR: As soon as the monitor unit is switched on, the connection indicator flashes rapidly and the monitor unit starts searching for the camera unit. Once the camera unit has been found, this indicator will light continuously or will start flashing at a slow pace. 4.
n n m’ f d- by 4.7 • • • • • RECEPTION INDICATOR / OUT OF RANGE MESSAGE: In the upper left-hand corner of the image on the monitor unit, there is an indication of the strength of the signal being received from the camera unit. : very good reception, : standard good reception, : reasonable reception In all cases, the audio and video quality is shown with the same level.
5 ECO MODE 6 5.1 OPERATION: If ECO mode is disabled, there is a continuous connection between the camera unit and the monitor unit, and you have continuous video. The audio is only transmitted if the sound level you set under ‘Sensitivity’ is exceeded. If you enable ECO Mode, both the camera unit and the monitor unit go into sleep mode, and there is NO connection.
n n- s 6 SETTINGS 6.1 INTRODUCTION: The DVM-70 has several settings that you can easily adjust via a simple on-screen menu. 1. press the M button to open the menu 2. use the or buttons to scroll through the menu options 3. press the M button to select the setting (the colour changes from light blue to dark blue) 4. use the or buttons to change the setting (you will hear 2 beeps when you reach the start or end of the list) 5. press the M button to save the change 6.
6.4 SENSITIVITY: You can set the sensitivity with which the camera unit's microphone picks up the sounds and transmits them to the monitor unit: 1. press the M button 2. use or to scroll to SENSITIVITY 3. press the M button 4. use or to scroll to the desired sensitivity Level 1: activated by loud sounds ..... Level 5: activated by quiet sounds you need to determine the ideal level for your situation by trial and error 5. press the M button to confirm your choice 6.
ot 6.7 TEMPERATURE: At the top of the image the temperature is diplayed of the temperature in the room in which the camera unit is located. This display can be set to degrees Celsius or degrees Fahrenheit. You can also set an upper and lower limit, so that an alarm tone sounds whenever one of those limits is exceeded. 1. press the M button 2. use or to scroll to TEMPERATURE 3. press the M button 4. use or to select between ‘Format’, ‘Minimum’, ‘Maximum’ and ‘Alert’ 5. press the M button 6.
7 POSSIBLE MESSAGES ON SCREEN The following messages may be displayed on screen during use, either accompanied by warning tones or not: No link: The connection between the camera unit and the monitor unit has been lost. This may be caused by the distance between the units being too great, by the camera unit being switched off or by the camera unit being deactivated as a result of empty batteries. Battery low: The battery in the monitor unit is almost empty.
at- - ou u 8 TIPS AND WARNINGS 8.1 • • • GENERAL: Read the manual carefully and follow all the instructions. Never place or use the camera or the monitor in a wet or damp room or environment. Make sure that heat can be adequately dissipated; never cover the monitor unit, the camera unit and/or the mains adapter(s) or place them immediately next to a source of heat. Use only the supplied mains adapter(s); connecting another type of adapter may damage the electronic equipment.
8.7 • • • 8.8 • 8.
ra s ni. er 10 SPECIFICATIONS Range: up to 50m indoors up to 300 metres outdoors Power supply monitor unit: 3.7V Lithium Polymer battery (included), made by BYD 6VDC 800mA mains adapter (included), 2.35mm plug model: MOSO MSP-C0800IC6.0-5W-DE or HONR ADS-5Q-06 06005GPG or TEN PAO INTERNATIONAL LTD, S006MV0600080. Power supply camera unit: 4 x 1.5 V AA battery (not included) 6VDC 800mA mains adapter (included), 5.5mm plug model: MOSO MSP-C0800IC6.
12 TABLE OF CONTENTS 1 PRODUCT DESCRIPTION.............................................................................................. 2 2 2.1 2.2 2.3 OVERVIEW OF FUNCTIONS ICONS ON THE SCREEN .............................................................................................. 2 MONITOR UNIT...............................................................................................................3 CAMERA UNIT ..............................................................................
8.5 8.6 8.7 8.8 8.9 8.10 MAINTENANCE.............................................................................................................15 EXPANSION...................................................................................................................15 TROUBLESHOOTING................................................................................................... 16 RANGE.................................................................................................................
Service Help Aziëlaan 12 ‘s-Hertogenbosch WWW.HESDO-SERVICE.NL INFO@HESDO-SERVICE.NL NL +31 (0) 73 6411 355 FR +32 (0) 3 238 5666 Service Aziëlaan 12 ‘s-Hertogenbosch Help WWW.HESDO-SERVICE.NL INFO@HESDO-SERVICE.NL NL +31 (0) 73 6411 355 FR +32 (0) 3 238 5666 ver3.
