Operation Manual

7
3.2 PARENT UNIT:
Power supply:
The parent unit can be powered directly by the included
rechargeable battery or via the supplied power adapter. As
soon as you connect the power adapter, it will charge the
battery allowing for mobile use of the parent unit.
Battery:
1. Open the battery
compartment by sli-
ding off the battery
cover at the rear of
the unit.
2. Connect the battery
plug in the battery
compartment accor-
ding to the gure below and install the battery.
3. Slide the battery cover back onto the parent unit.
Never connect the plug or install the battery by force.
Only install the supplied rechargeable NiMH battery
(3.6V, 750mAh).
Power adapter:
1. Connect the other 6V
power adapter to the
DC6V input on the side of
the parent unit. (behind
the rubber cover top)
2. Insert the adapter into a
230V wall socket.
Only use the supplied
power adaptor with model number S003IV0600060.
You can recharge the battery with the parent unit eit-
her switched on or off, although charging the battery
with the parent unit switched off will take less time.
+ (Rood) - (Zwart
)