USER MANUAL DVM-65
CONTENTS 1 INTRODUCTION....................................................... 3 2 2.1 2.2 2.3 FUNCTIONS OVERVIEW BABY-UNIT................................................................ 3 PARENT UNIT........................................................... 4 ICONS ON THE DISPLAY......................................... 4 3 3.1 3.2 INSTALLATION BABY-UNIT................................................................ 6 PARENT UNIT........................................................... 7 4 4.
1 INTRODUCTION The Alecto DVM-65 is a wireless audio/video baby monitor, suitable for private use indoors. You can either watch and listen continuously or you can have the baby monitor switch on automatically as soon as your baby starts crying. The Alecto DVM-65 meets all essential requirements and other provisions as described in the Directive 2014/53/EU. The declaration of conformity is available on: http://DOC.hesdo.com/DVM-65-DOC.pdf Use of this equipment is allowed in all countries of the EU.
2.2 PARENT UNIT: 1. visual sound indication, also displays the volume level while adjusting 1 2. display 3. battery indicator 4. increase/decrease the reception volume, 2 in zoom mode: press and hold to view up or down, in menu 3 9 mode to scroll the 10 setup options 4 5. zoom in/out, in zoom 5 5 mode: press and 6 8 hold to view to the 11 left or right, in menu mode: press to adjust 7 4 settings 6. talk-back button towards the baby unit 7. menu button 8.
‘patrol-mode’ (setup choice to view cameras one after the other when using multiple cameras) indication that the zoom mode is activated volume set to 0 (speaker turned off) VOX is activated (unit switches on automatically when the baby starts crying) temperature display of the baby room battery indication: battery is empty battery is full the battery is charging animation while appears when the adaptor is connected and the battery is not or incorrectly installed icons on the display during setup this icon
3 INSTALLATION 3.1 BABY-UNIT: Power: 1. Connect one of the supplied 6V power adaptors to the 6V DC input of the baby unit. 2. Insert the adapter into a 230V wall socket. Only use the supplied power adaptor with model number S003IV0600060. >2m r When used as a baby monitor: Make sure the baby cannot reach the baby unit or wire. Place the baby unit at least 2 meters away from the baby and you can bundle cables that are too long with tape or cable ties available specifically for this purpose.
3.2 PARENT UNIT: Power supply: The parent unit can be powered directly by the included rechargeable battery or via the supplied power adapter. As soon as you connect the power adapter, it will charge the battery allowing for mobile use of the parent unit. Battery: 1. Open the battery compartment by sliding off the battery + (Rood) - (Zwart) cover at the rear of the unit. 2. Connect the battery plug in the battery compartment according to the figure below and install the battery. 3.
Charging: The battery will be charged as soon as you connect the power adapter and insert it into a 230V wall socket. • For initial use, charge the battery for at least 15 hours, even if the indicator shows a fully charged battery. • The charging circuit for the battery is managed electronically and there is no risk of overcharging, this allows you to leave the adapter connected at all times.
4 USE 4.1 BABY-UNIT: Switching on/off: • press briefly to switch on • press and hold for 2 seconds to turn off The green indicator on the baby unit flashes while the baby unit is trying to establish a connection with the parent unit, this indicator remains lit when the connection is successful. Volume: Use the and buttons to adjust the reception volume for the talk-back function from the parent unit.
While adjusting, the volume level will be indicated on the display and the icon will appear in the upper part when the volume level is set to 0 (no sound). Switching on/off automatically: (VOX) You can set the parent unit to turn off when the baby is sleeping quietly and the baby unit is not detecting any sound, and let it turn on again as soon as the baby starts to cry. Here you can set the trigger level for turning on images and sound: 1. Press the M button and use the or button to scroll to the option 2.
Zoom function: Press the button to turn on the zoom function (moving the image somewhat closer) and press the button to turn off the zoom function. When the zoom function is switched on, the icon will appear in the upper part of the display. With the zoom function activated, press and hold the , , or button to move the image to the left, to the right, up or down (attention: the camera doesn’t actually move, the display merely shows another part of the available image). Brightness: 1.
5 MULTI CAMERA 5.1 INTRODUCTION: You can register up to a maximum of 4 baby units (cameras) on the DVM-65 parent unit. Separate cameras are available via the service department of Alecto via internet www.alecto.nl Order nr.: DVM-651 version B Read paragraph 4.2 (Multi-camera) for instructions on how you can use the parent unit to switch to the image from other cameras. 5.2 REGISTERING ADDITIONAL CAMERAS: 1.
6 TIPS AND WARNINGS 6.1 GENERAL: • Thoroughly read the user’s manual and follow all indications. • Never place the baby unit or parent unit in wet or humid room or environment. • Ensure adequate heat dissipation; never cover the parent unit, the baby unit and/or the power adapter(s) and never place them directly next to a heat source. • Only use the supplied adapter(s); connecting a different type of adapter will damage the electronics.
6.4 EAVESDROPPING/WIRETAPPING: • Eavesdropping/wiretapping of the signals from this baby video monitor is nearly impossible. Not only must one be within range of the baby video monitor, one also needs some very costly equipment. 6.5 MAINTENANCE: • Only clean the baby monitor with a moist cloth; never use chemical cleaners. Before any cleaning, you must disconnect the adapters. 6.
6.
8 WARRANTY For the Alecto DVM-65 you have a warranty of 24 months from the date of purchase. During this period, we guarantee the free repair of defects caused by material and workmanship errors. All this subjected to the final assessment of the importer. HOW TO HANDLE: If you notice any defect, first refer to the user’s manual. If the manual provides no definite answer, please contact the supplier of this baby video monitor or contact customer service of Alecto via the Internet www. alecto.
