User Manual

39
AVOID THE FOLLOWING PLACES FOR INSTALLATION:
• Do not install the CO-detector in the turbulent air created by ceiling fans.
• Do not install the CO-detector near vents with fresh air.
• Do not install the CO-detector near doors and windows leading outdoors.
• Do not install the CO-detector near extremely dusty, dirty or greasy spaces such as heating spaces
<4m³ or pantries. Dust, grease and household chemicals can affect the sensor.
• Install the CO detector at least 0.5 meters away from gas discharge lamps (halogen) because of
electronic interferences that can lead to false alarms.
• Do not install the CO detector in humid and wet spaces, such as the bathroom.
• Do not install the CO detector in a location where the temperature is lower than -10°C or warmer than +40°C.
• Do not install the CO detector in a place where the humidity is higher than 93%RH.
• Never install the CO detector behind curtains or furniture. Carbon monoxide must be able to reach the
sensor to ensure the sensor can properly detect carbon monoxide levels.
• NeverinstalltheCOdetectoratonatableorsimilarsurface.
• Never install the CO detector in spaces where spray cans may be used (hair spray, deodorant)
INSTALLATION:
1. Install the mounting plate on a suitable spot, using the mounted plugs and screws.
2. PlacetheCOA4010onthemountingplate.Makesurethatthepinonthebacksideinttedinthe
mounting base. Slide the COA4010 downwards to lock into position on the mounting plate.
3. Youcanperformthersttestbybrieypressingthetestbutton,seealsoparagraph“Testing”.
4. The CO detector is now functional.
USER MANUAL
Nicht hinter
ein Kabinett
Nicht hinter
ein Vorhang
Nicht neben
Belüftungs-
ö󰀨nung