Operation Manual

USAGE

Pressing buttons:

To prevent unwanted power-on or power-off, the buttons must be pressed ﬁ rmly. You will

feel a click when a button is pressed correctly.

Power-on:

1. Press button on / off. The display ﬂ ashes for a couple of seconds.

2. As soon as the display readout is

and in the down left corner the word [ ZERO ]

lights, the scale is ready for use.

Weighing:

1. Power-on the scale as described previously.

If a towel is put on the scale and the display show its weight, press the on / off

button again to reset the display to

2. Put the baby in the centre of the scale.

3. As soon as the scale ﬁ nished measuring, the display readout starts ﬂ ashing and

shows the weight of the baby.

Power-off:

1. Press on / off key for 4 seconds to power-off the scale.

To safe batteries, the scale will switch-off automatically after 5 minutes of no use.

Memory:

The last measured weight is automatically stored in memory. Use this memory for

example to compare the weight of your baby before and after feeding.

1. The display must show .

2. Press button mem.

3. The last measured weight is displayed, including the word [ mem ] in the right down

corner of the display.

4. Press again to return to the weighing mode.

Pay attention to ﬁ rst read the memory before making a new measurement. Every new

measurement is automatically stored in memory, erasing the former stored weight.