Instructions for Use

34
Q1: Why doesn't the Wi-Fi name appear when I connect to Wi-Fi?
A1: You need to turn on the “location permission” for the app in the system settings and
change it to “allow when using”.
Q2: Will the camera show red lights when night vision is activated?
A2: The built-in infrared lamp beads make the camera only show some dim red lights
when night vision is activated, but the image quality is still clear under no light
environmen.
Q3: What are the requirements for Wi-Fi?
A3: Please use a 2.4GHz wireless network. The device does not support the 5GHz
wireless network. Meanwhile, please set the Wi-Fi authentication method to wpa2-psk
or other lower level of security method. A password is required.
Q4: How far should the camera be placed from the router?
A4: After testing, the Wi-Fi connection distance can normally reach up to 100 meters in
the open area. However, the actual situation depends on the strength of Wi-Fi and its
surrounding environment.
Q5: What is the maximum length of recording time?
A5: You can choose the recording time in the app. The camera record for a fixed time or
“auto” mode, when depending on whether there is person. The maximum length of a
video is 3 minutes.
Q6: What should I do when the device is in malfunction?
A6: Long press the power button to restart the camera. If there is response,
you can open the back shelf of the camera, and then open the rubber plug on the side
then press the reset button with a reset needle to forece the power off, then long press
the power button to restart the camera.
Frequently Asked Questions