Installation Instructions

IntelliGaze™ Installation & Service Manual IntelliGaze™ Reference

Overwrite Calibration

When calibrating both eyes the systems stalls at each point until data from both eyes is available. This

ensures the maximum data quality sacrificing tolerance to unstable data. Some users can not be cali-

brated because there will be points where at least one eye is not visible or unstable.

Pressing the space bar overwrites that calibration point. The system now relieves the strict data accep-

tance and calibrates the point with whatever data is available at this point.



The calibration overwrite routine can also be used for user with problematic glasses. Pressing the space bar

will force the system to accept data which would be rejected under normal calibration.

Calibration Profiles

A calibration can be saved for later usage. This is especially useful when working with several users on

a system and the calibration is difficult to achieve. Using Load and Save Calibration you can very easily

switch between calibrations. Beside the individual calibration data, the profile contains all settings of

the calibration procedure.

Use the IntelliGaze Operation Center to access this function:

Button Function

Load calibration profile

Save Calibration profile



The calibration profiles are shared with the Gaze Assistant tool, where several management functions are

provided.

6.5.3 Input

Clicks and other IntelliGaze actions can be triggered with dwell, blink, switches or keys. There are dif-

ferent channels for triggers which can be used simultaneously. The primary trigger can be dwell, blink,

switch or key. The secondary trigger can be blink, switch or key. The action will be triggered is deter-

mined by an application profile.

Some external switches generate physical key presses rather than Windows joystick button click

events. Choose “key” as trigger input and define which key is to be used.

To check if your hardware can be used as switch (Windows USB joystick) run the following windows

program. “setup USB game controllers”. You device should appear in the list if it supports Windows USB

joystick. Windows USB joysticks are access as “switches” in the IntelliGaze Input options.

Version: 3.0