Installation Instructions

IntelliGaze™ Installation & Service Manual IntelliGaze™ Reference

To specify that any combination of SHIFT, CTRL, and ALT should be held down while several other keys

are pressed, enclose the code for those keys in parentheses. For example, to specify to hold down

SHIFT while E and C are pressed, use "+(EC)". To specify to hold down SHIFT while E is pressed, followed

by C without SHIFT, use "+EC".

6.5 IntelliGaze Preferences

The preferences menu can be used with a keyboard, a mouse or with touch. It can be accessed via the

IntelliGaze tray icon or by pressing Ctrl-F11. Alternatively it can be accessed from the operation center.

The gaze control will be turned off while editing menu entries.

●

General - General Options, Version and License Status

●

Calibration - Calibration parameters

●

Input - Trigger to do clicks and other actions

●

Integrated Keyboard - alea integrated keyboard

●

Operation Center - Appearance of the operation center

●

Application Center - Options for the AC 'home-page'

6.5.1 General Options

Language

The user interface language of IntelliGaze can be adapted by choosing an entry from the list.

A restart of IntelliGaze will finalize the change.

Licensing

The IntelliGaze licensing scheme is handled by the CAM30/CAM30NT camera module's hardware. The

license key is stored in the camera module. This allows the user to install and run the software on sev -

eral computers. Wherever the camera will be connected, the licensed functionality will be available.



The IntelliGaze™ software will only start properly if the camera has been connected.

The actual licensing is done during the production process according to the customer order. Typically

this will be a non time-limited 'AAC Standard' license.

The license might also restrict the use to particular client software or only grant access to

particular features.

The status of the system license can be checked under: → Options → General

Version: 3.0