Installation Instructions

IntelliGaze™ Installation & Service Manual IntelliGaze™ Reference
6.4 Operation Center
The operation center is the central location where the user and the caretaker control the eye tracking
options. The camera/monitor orientation is done with the status window of the first page being open.
In cases, where tracking is hard to stabilize or environmental conditions are very challenging, the 'eye
display' mode can be enabled by clicking in the status window. After the camera is alined the gaze is
being calibrated. Calibration profiles can be loaded and saved on the calibration options page.
 The operation center can be opened in three different ways. Touch the display, look above the screen, use the
right side menu to directly enter the application options sub-page of the operation center.
 The operation center offers just a subset of options in the Assisted Access.
 When opening the operation center with touch no gaze input is available in the operation center
© alea technologies gmbh, 2015 Version: 3.0 49
Operation Center Structure