Installation Instructions

Setup IntelliGaze™ Installation & Service Manual

After adjusting the vertical distance, the horizontal position must be set. The camera can be firmly

locked in place by tightening the hidden screws [B].

B: Hidden Lock-Screws, use 1,5mm Allan/Hex key.

The hardware installation is completed by connecting the USB cable to a USB2-port on the PC and

connecting the provided power-supply.



When using USB2 extension cables, make sure to use USB2 certified cables, and be certain that the combined

length does not exceed maximum length of 3m. Use USB2 hubs only when required and carefully examine the

system performance.

Version: 3.0