Installation Instructions

IntelliGaze™ Installation & Service Manual Setup

Very slim monitors, in particular Tablet-PCs, may benefit from the use of a custom spacer that will allow

more space between the VESA-adapter and the front of the device.

Once the adapter has been mounted on the back of the monitor and the monitor has been attached

to a monitor-arm or desktop-mount, the aluminum rods can be inserted and roughly adjusted.

Please make sure that the monitor is mounted stably and attach the CAM-30 unit underneath by

inserting the rods into the appropriated mounting holes in the back of the device.

The camera should be adjusted so that it is centered and parallel to the front of the monitor, as close

to the bottom of the screen as possible.

A: Thumb-Screw or Screws for 2mm Allan/Hex.

Please use limited force when tightening!

Version: 3.0

VESA-Mount

Monitor-Arm

M4 Screws

Monitor, top

VESA-'Spacer'