Installation Instructions

IntelliGaze™ Installation & Service Manual Setup

4.4 Camera Mounting Options

alea technologies can provide several custom mounting adapters to cover the majority of arising

mounting challenges.

While several adapters attach between VESA 75/100 mounts of the monitor and, i.e. a desktop arm,

some integrate more closely with dedicated communication devices, i.e. the Tellus 4.

More recently, some adapters have been adopted to carry the new CAM30NT model which maintains

the general mounting scheme, but requires slight horizontal adjustments due to the reduced camera

depth. Please find details below.

4.4.1 'Standard' VESA-Adapter - 'No.1'

This was the first adapter, that alea technologies provided.

This adapter attaches to small computers and TFT screens which provide a 75/100mm VESA mounting

option. The mounting height can be adjusted in a very large range.

Mount: VESA 75/100

Thickness (add to screw length): 12mm

Camera Interface 2x 8mm

Compatible Cameras Cam30, Cam30NT

Maximum Mounting Height*: 156mm

VESA75

/ 144mm

VESA100

Minimum Mounting Height*: ---

* Mounting Height: distance between lower VESA-Screw and center of 8mm rod.

Shorter aluminum rods, in particular for 12” Tablet computers can be provided on request.

Version: 3.0