Installation Instructions

Setup IntelliGaze™ Installation & Service Manual

4.3.3 Tools

The assembly and service of the system may require several tools:

CAM30

Tool Part of

Demo-Unit

Purpose

Allan / Hex Key 0,9 mm Yes CAM-30, re-adjust lens calibration.

see: p.85

Allan / Hex Key 1,5 mm Yes CAM-30, fixate housing.

see:p.24

Allan / Hex Key, 2mm Yes VESA-Mount, fixate aluminum rods

see: p.23

Metric Ruler or

Measuring Tape, 50 cm

No Monitor Calibration

Screwdriver, div. No Depending on Monitor & Arm.

Version: 3.0