Installation Instructions

IntelliGaze™ Installation & Service Manual Setup

4.3.2 Monitor

Technical Requirements

Screen size: TFT monitors 12” to 19”wide-screen.

Mounting: VESA75 or VESA100 compatibility

(for IG-30/30NT VESA adapters)

In general most monitors that comply with the requirements above should work with the IG-30 or IG-

30NT system.

One issue to consider when selecting a monitor is the width of the bottom screen-border (→ see

sketch below). A large border, which forces the camera unit further away from the active screen region,

might prevent accurate tracking on the upper parts of the screen. For the above reason screens with

speakers integrated at the bottom should be avoided.

Some VESA-mounts might require a custom spacer or special screws to integrate safely with the stan-

dard VESA adapter provided with the IG-30 or IG-30NT system.

In most cases it is highly recommended to use a monitor arm, such

as the Ergotron-LX (→ see image), to mount the monitor and camera

units as flexibly as possible. Nevertheless, several, particularly height

adjustable, desk-mounts allow integration without the use of a mon-

itor arm.

When in doubt, feel free to ask for our list of recommended moni-

tors, or inquire about a particular model before making a purchase.

alea technologies will also be pleased to provide monitor arms, desktop mounts or customized solu-

tions on request.

Version: 3.0

small

large