User Manual

Folding in the handle
1. Release the quick-release levers
12
on the handle mount
11
.
2. Take the serrations of the locking washer out of the handle mount
11
by lifting
it slightly and then set down the handle on the device.
3. Release the quick-release levers
3
in the centre of the handle.
4. Carefully fold the handle. Watch out for the connection cable. It must not be
pinched between the handle parts.
The device is ready for storage.
Storage conditions
- Thoroughly clean the device (see “Cleaning”).
- Store the device in a clean, dry, frost-protected place out of the reach of children.
- Store the device in a location away from sunlight and other heat sources.
- Always store device parts and accessories together with the device.
- Store the device and accessories at a temperature between +5 °C and +20 °C.
Transport instructions
- Always transport the device with the handle folded in (see "Folding in the
handle")
- Only lift the device by the carry handle
7
.
- Exclusively transport the device in normal position; prevent tilting while
transporting.
- When transporting the device in vehicles, the device must be secured in
accordance with the applicable regulations (load securing).
Storage
18