Operating instructions

9
ALT5.INSA 070910-24
A
B
B
Surround Assembly and Installation
1) Remove crate and all plastic packaging.
2) Remove Top(A) and Shields(B). (Fig. #8)
3) Remove Surround Top from Packaging.
4) Remove Surround sides (C) from  rebox casing by removing
2 screws (D) on each side of  replace. (Fig #9)
5) Using a 7/16” wrench or socket, remove bolt (E) from Surround
sides.(Fig #10)
6) Attach the brackets to the Surround sides as shown in Fig.
#19. Use the bolts and washers in the mounting hardware kit
found with the Surround Top. (Fig #11)
7) Lay Surround sides  at on  oor and align with Surround
Top(H). Square the surround by aligning edges(I) on each
side. Fasten bolts (J) to attach bracket.(Fig. #12)
NOTE: If mounting an Oversized Surround (not shown), use
mounting holes (K) to attach.(Fig. #12)
Fig. # 8
Fig. # 9
Fig. # 12
Fig. # 11
F
F
F
F
E
JJ
K
K
I
I
H
Fig. # 10
C
D
D