Operation Manual

8
7:1 TOOLS MENU – FUNCTIONS
The following tools are available from the tools menu.
A grey function button means the function has not been installed and/or activated.
4. Clock
The clock must be set if engine heater
start, night and/or day auto and
automatic start is to work. If 12V power
is lost, the clock will stop and will no
longer be displayed. Installing battery
backup will prevent this happening
5. Return
To return to the previous menu, press this
symbol.
6. *Setting room sensor
Select which temperature sensor shall
be active. Set whether the sensor loca-
ted in the accommodation part, the
sleeping part or in the panel is to be
active. If Auto is selected, the sensor in
the panel is active and will automatically
switch to room sensor (sofa and/or bed)
if one is connected. If two room sensors
are connected, it will be the one for
the accommodation part that is active
(sofa).
1 kW
+22°C
7. TOOLS MENU
The tools menu can be accessed from the settings menu.
1. Control panel showing the settings menu.
Press the tool symbol to access the tools menu.
1. Night automation
Automatically changes certain func-
tions during the night. Select that it
takes place every night or a specific
night each week. The functions that can
be changed are:
• Temperature
• *Change of room sensor
• Invert display
• Turn o warm water
• *AC in quiet mode
2. Day automation
Automatically changes certain func-
tions, e.g. if you are away for a while
during the day. Select that it takes
place every day or a specific day
each week. The functions that can be
changed during the day are:
• Temperature change
• Turn o warm water
3. Prio setting
With this function you can choose to prio-
ritise (select) electricity or gas as the main
alternative.
Settings
43
8
1
7
2
56
Settings
9
13
10 11
12
Settings
14
19
17
1615
18
Settings
20
24 23
2221
Functions marked with a (*) are accessories, which are not installed on all vehicles, refer to the vehicle
manufacturer’s instructions.