Operation Manual

6. ACTIVATED FUNCTIONS A

Activated functions (see ﬁg. 2) can be accessed by pressing the A symbol (see ﬁg. 1). This screen shows

the various functions that are activated. The respective function that is activated can be accessed from

here and new settings can be made.

NB! A symbol is only visible if any of the functions shown below are activated and/or installed.

1 kW

+22°C

There is a description below of the various symbols in the Activated Functions menu.

For a more detailed description, see section 7.

Activated Functions

Night auto is activated. However, it does

not have to be within the time/day setting.

Automatic boiler start is activated. Howe-

ver, it does not have to be within the time

setting.

* This function is used to enable an exter-

nal main panel to operate certain of the

boiler’s functions or if *Alde Smart Control

(Art. No. 3020 057) is installed to control the

boiler via a Smart Phone.

* Displayed if one or two external room

sensors are connected.

Circulation pump in continuous operation.

NB! This function limits the supply of hot

water, particularly when there is a low heating

requirement

Day auto is activated. However, it does not

have to be within the time/day setting.

* The boiler is set to be started with Exter-

nal start but has not necessarily been

activated.

* Load monitor is connected and set to

limited current.

* Booster is on.

High altitude mode is activated.

* EisEx is installed but not necessarily tur-

ned on.

* DuoControl or DuoComfort is installed

and connected to Alde Compact 3020 HE

* Timer for engine heater is set but not

necessarily within the set time/day.

* Floor heating is in operation.

Figure 1 Figure 2

Functions marked with a (*) are accessories, which are not installed on all vehicles, refer to the vehicle

manufacturer’s instructions.