Operation Manual

13
GB
Inst Acc
Optional pump
Third party Panel
Load Monitor
Settings
Figure 1
Figure 2
Inst Acc
Main Remot 12V
Main Manual 12V
Main 230V
Inst Acc
Duo Control
Booster
EisEx
Inst Acc
Aux Hot Water Tank
Underfloor Heating Pump
Engine Pre-Heat Pump
Figure 3
Figure 4 Figure 5
The respective box should be checked
if you have:
Connected an external panel
orAldeSmartControl (Art. No. 3020 057).
Connected an extra 12 V pump, often
located in the expansion tank.
Connecting load monitor.
Connected a 12 V pump that is variably
adjustable with a potentiometer knob.
Connected a PWM controlled 12 V
pump with variable speed control that
is set from the panel.
Connected a 230 V Pump.
Connected a Booster.
Connected a bottle changer (Duo-
Comfort or DuoControl).
Connected a defroster (EisEx).
Connected a 12 V pump to the floor
heating.
Connect an additional hot water tank
to increase the hot water capacity and
also obtain continuous hot water (Art.
No. 3020 160).
Connected a 12 V pump for heating
the vehicle’s engine through the Alde
heating system.
11. ACTIVATING INSTALLED FUNCTIONS
The first time you use the heating system, check that the right accessories/functions are activated.
This also applies when you supplement the heating system with accessories/functions.
Activate accessories/functions by pressing on Installed Accessories, (see fig. 1) and ticking the respective
function/accessory to activate.
Functions marked with a (*) are accessories, which are not installed on all vehicles, refer to the vehicle
manufacturer’s instructions.